MODEL 235 & 240S

Both models are designed to mount on the underside of trolling motors.  Model 240S is the smaller of the two for wide angle elements.  They can also be used for thru-the-hull sounding when cemented to the inside of the hull.

Specification Data Sheet

Engineering Drawing - Model 235

Engineering Drawing - Model 240S

Options:

bulletTemperature sensor.

Weight:

bulletModel 235 - .9 lbs.
bulletModel 240S - .6 lbs.

Specifications:

FREQUENCY (kHz)

BEAM WIDTH (degrees @ -3db)

ELEMENT SIZE (inches)

ELEMENT SIZE (millimeters)

CAPACITANCE (pf)

NOTE (1)

IMPEDANCE (ohms)

NOTE (2)

TRANSMIT RESPONSE

(db)

NOTE (3)

RECEIVE RESPONSE

(-db)

NOTE (4)

POWER RATING, RMS (watts) 

REMARKS

200 18 1.1 28 965 550 157 -189 300  
200 12 1.45 37 1265 480 161 -182 300  
200 11 1.7 43 1900 300 163 -185 600 Dual frequency, 200 & 50 kHz
200 9 2.0 50 2185 385 165 -186 600  
160 20 1.1 28 885 750 158 -189 300  
160 11 2.0 50 1750 550 164 -183 600  
120 38 1.0 25 1050 500 167 -181 300  
120 14 2.0 50 1725 320 164 -171 600  
75 29 1.7 43 4200 200 160 -184 600  
50 45 1.7 43 1600 440 156 -173 600 Dual frequency, 200 & 50 kHz
50 43 2.0 50 4550 265 173 -184 600  

                                                                NOTES: (1)  with standard length cable.  (2)  equivalent series R in water.  (3)  the source level generated by one watt input.  (4)  the open circuit RMS voltage generated by a pressure of one microbar.

Back